228 BPM Metronome

Press play and the click starts at exactly 228 BPM. Time signature, accents, subdivision and tone are all still yours to change.

Metronome and tap tempo tool

120 BPM

Click any beat to cycle it through strong, weak and muted.

Volume
80%

Shortcuts — Space start/stop (taps on the Tap BPM panel) · 1 BPM · Shift+ 5 BPM · T tap tempo

How fast is 228 BPM?

200 to 240 BPM is the top of the dial. A beat drops under 300 milliseconds, the click starts to read as a continuous tone, and quarter notes are perceived in groups rather than one at a time.

228 BPM means 228 beats pass every minute. One beat lasts 263.2 milliseconds (0.263 seconds); counted in 4/4 a bar takes 1.05 seconds, so about 57 bars go by each minute. Over a three-minute song that is roughly 171 bars, or 684 beats.

A resting pulse sits around 60–80 beats per minute, so 228 BPM is roughly 3.3 times faster.

Note lengths at 228 BPM

Here is what each note value actually measures at 228 BPM. It is the table to check before subdivision practice, and the one producers reach for when setting time-based effects.

Note lengths at 228 BPM
Note valueLengthPer minute
Whole note (4 beats)1052.6 ms57
Half note (2 beats)526.3 ms114
Quarter note (1 beat)263.2 ms228
Dotted eighth note197.4 ms304
Eighth-note triplet87.7 ms684
Eighth note131.6 ms456
Sixteenth note65.8 ms912

How to practise at 228 BPM

If this tempo is still out of reach, climb to it in three steps. Start at 160 BPM (70% of target) where you can watch what your hands are doing, move to 194 BPM (85%) to balance the sound, then go to 228 BPM. Only move up when you have played the passage five times in a row without a mistake. If the tempo is already comfortable, push to 240 BPM for a few passes and drop back — 228 BPM will feel roomy afterwards.

Short and often. Repetition at this speed loads the hands hard, and repeating while fatigued cements bad mechanics. Cap each burst at about 30 seconds and drop to half speed in between to check the motion has not grown.

Music that sits at 228 BPM

Even music notated above 200 BPM is nearly always counted in halves or quarters. A large number on the page is not a claim that anyone feels every beat.

  • Thrash and speed metal
  • Gabber and hardcore techno (200 BPM and up)
  • Up-tempo bebop
  • Tarantella and other fast folk dances
  • Technique drills at the top of the range

Frequently asked questions

How long is one beat at 228 BPM?

One beat lasts 263.2 milliseconds, or 0.263 seconds. A bar of 4/4 takes 1.05 seconds, an eighth note is 131.6 ms and a sixteenth note is 65.8 ms.

What tempo marking is 228 BPM?

The 200–240 BPM range is usually labelled Prestissimo. Those boundaries were never fixed — different eras and composers used the terms differently — so treat the name as a description of character and the number as the measurement.

What if 228 BPM feels too fast?

Slowing down is not losing ground; it is buying accuracy. Work up from 160 BPM through 194 BPM to 228 BPM. Anything you repeat at a tempo where you make mistakes gets learned along with the mistakes, so the fastest tempo you can play cleanly is the tempo worth practising at.

How do I feel 228 BPM in half-time?

Set the click to 114 BPM and count eighth notes between the clicks. With half the clicks, your own timing has to fill the gaps, which is exactly why half-time practice exposes drift that a 228 BPM click would have hidden.